Leaky faucets are common, especially in older homes. Even newer ones can have issues with a lack of sealing or an outdated design that allows water to enter from the pipes. If you notice a steady stream of water coming from your faucet, it’s time to take action. The good news is that fixing a leak isn’t expensive and doesn’t take much time. Here’s how you do it:
![How To Fix A Leaky Faucet](https://www.thespruce.com/thmb/B7kW1zDo3YL8kZeVFuLNsFpwPsU=/1500x0/filters:no_upscale():max_bytes(150000):strip_icc()/fix-a-leaky-faucet-4103580-09-f74c67f64d80424caeb8f91a190952c3.jpg)
Inspect your plumbing
The first thing you need to do is inspect your plumbing for any potential issues. An easy way to do this is to turn on the water and see if it comes out of other fixtures. If it does, you may have a small leak in your pipes. To get an idea of what your pipes look like, you can turn on the water in another fixture and look for the difference in pressure. If you see a drop, you may already know what’s causing the leak. In this case, you’ll need to troubleshoot further, but if the pressure stays the same, there’s a good chance you have a leak in your pipes.
Repair small leaks
As mentioned, fixing a leak isn’t expensive and it’s not difficult at all. The only tools you need are a wrench and a putty knife. You can get a wrench at any hardware store and it’s used to tighten or loosen faucet parts. To fix a small leak, unscrew the faucet’s handle and washer. Clean the inside of the faucet with a sponge and a bit of dish soap. Then, remove the washer and either tighten the washer or replace it with a new one.
Check for damaged parts
To check for damaged parts, turn on the water and see if it comes out of other fixtures. If it does, you may have a leak in your pipes. To get an idea of what your pipes look like, you can turn on the water in another fixture and look for the difference in pressure. If you see a drop, you may already know what’s causing the leak. In this case, you’ll need to troubleshoot further, but if the pressure stays the same, there’s a good chance you have a leak in your pipes.
Fill the sink with a stop leak
For a stop leak, you’ll need some dish soap, a sponge, and a bowl. Pour some dish soap into the bowl and mix it in with water. Then, place the sponge in the bowl and add more soap until it’s roughly the right consistency. Once you have the right amount, place it in the sink next to the faucet. Doing this will keep the soap from floating around and getting into other areas of your pipes. It will also keep the soap from drying out. So, when the leak starts again, the sponge will stop it immediately.
![How To Fix A Leaky Faucet](https://www.thespruce.com/thmb/42zHXKNFJ8jsnxSQ2ZN4Kd1vZmE=/3000x2000/filters:no_upscale()/fix-a-leaky-faucet-4103580-14-2561c539f8de42979250f64ef23a267b.jpg)
Finish up with a sealant
If your faucet is metal, you may also want to seal it with a sealant. This will help make your faucet last longer, prevent rust, and keep it looking newer for longer. There are plenty of different sealants you can use, so make sure you pick one that works well with your faucet.
For example, if it’s a ceramic model, go with a silicone sealant. Another thing to keep in mind is that you may want to apply a sealant to your faucet before fixing the leak. That way, there will be no chance for water to get in.
Don’t forget the shower!
If you notice a leak in your shower, there’s a good chance the same thing is happening in your kitchen or elsewhere in your house. To fix a leak in your shower, you’ll need a few things. First, you’ll need a stop leak. Second, you’ll need to shut off the water valve.
Lastly, you’ll need a plastic bucket with a lid. Once you have everything, you can start the process. Simply place the stop leak in the shower’s drain. Then, open the water valve, allowing water to flow out of the shower head. Once the water flows out, you can close the valve and start filling the bucket. Once it’s filled, you can shut off the water and start troubleshooting further to find the leak.
When all else fails…
If none of these work, consider calling in a professional. This is especially true if you have a leak that happens regularly or one that seems to come from a specific area. If you decide to call one in, make sure you tell them exactly where the leak is coming from. This will let them know where to look and will help you get the job done faster.
If a professional doesn’t work out, don’t give up. There are a few things you can try on your own. One thing you can try is turning the water off at the main shutoff, then turning it on again a few minutes later. This should help re-seal the pipe, which may help with the leak. Another thing you can try is adding a bucket to your sink. This will help trap any water that’s leaking.
Wrapping up
Leaks in your faucet can be annoying and expensive, but don’t despair! With a little know-how, these issues can be fixed quickly. Keep in mind that you may have to do some research to find out what’s causing the leak, but it’s definitely worth it. The best part is that it doesn’t take much time and it doesn’t cost much money.
To fix a leak in your faucet, turn off the water at the main shutoff, then turn it back on a few minutes later. Next, inspect your plumbing for any potential issues, then repair small leaks and finish up with a sealant. If a sealant isn’t working, try a different sealant. When all else fails, call in a professional.