The majority of home water filters only tackle part of the problem. Commercial water filters, on the other hand, are built to catch all sorts of contaminants. With that said, it’s important to know when it’s time to get a commercial water filter instead of just replacing the filter in your existing tank.
If you own a business and have a drinking or ice-cold water for employees, customers, vendors, and staff members, an industrial-grade water heater repair is necessary.
There are many times when a standard home tank simply can’t hold enough hot water for day-to-day use. That’s where your commercial hot water tank comes into play.
What’s the difference between a standard hot water tank and a commercial one?
Both of these tanks are used to provide hot water to your business. The main difference between them is the amount of hot water they can hold. Commercial hot water tanks are generally much larger and designed to handle high volumes of water.
This makes them a more efficient way to heat water at a commercial facility. However, they can be more expensive to install. The most common commercial water heaters are 50-gallon-per-hour tanks. This means they can heat about 2.5 gallons of water per minute.
It’s important to know how much hot water your business uses so you can get a commercial hot water tank that is big enough to handle the load. A 50-gallon commercial water heater can hold up to 5 gallons of water at a time. If your business uses less water per day, you might be able to get by with a smaller tank.
On the other hand, if you have an operation that uses a lot of water, a larger commercial hot water tank can help you save money on your heating bills.
![Commercial Water Heater Repair](https://www.silcoplumbing.com/wp-content/uploads/2020/05/AdobeStock_39771786-1024x834.jpeg)
When is it necessary to get a commercial water heater repaired?
Commercial water heaters are much more likely to fail than standard residential water heaters. The reason for this is that commercial water heaters are exposed to more wear and tear on a day-to-day basis.
This can cause issues with rust, leaks, and damage that can cause the water heater to fail. If your hot water tank fails, you will be without hot water. If you have a large building with a lot of people relying on this hot water, this can be a huge inconvenience.
It’s important to have your commercial water heater inspected and repaired before you find yourself in this situation. You can call your local municipal utility department or call a company such as HydroMaster to get a yearly inspection of your hot water tank.
Why do you need corrosion protection in your commercial water heater?
Corrosion is the main reason that tanks need repairs. If your commercial tank has been exposed to moisture, it will rust. Rust is what causes the leaks that can cause your water heater to fail.
The good news is that commercial water heaters are generally built with corrosion protection in mind. This means that unless there is a serious water leak in the system, your water heater will not rust extensively. There are still some benefits to adding a corrosion inhibitor to your water heater.
This will help the system last longer and reduce the amount of water you need to use by around 10%. It’s best to test your water heater before adding a corrosion inhibitor, just in case there is an unidentified water leak.
What are some signs that your commercial water tank needs repair?
- Your water heater is constantly leaking
- If your commercial water heater is constantly leaking, it’s time to get it repaired. This can happen with a bad seal on the tank or a damaged tank.
- You’re not saving as much on your heating bills as you should be
- If you have a 50-gallon commercial water heater, you are likely not saving as much on your heating bills as you should be. A broken water heater can account for up to 20% of your heating bills.
- Your water heater is older than 10 years
- If your water heater is older than 10 years, there is a good chance that it has been repaired once already.
- Your water heater smells
- If your water heater smells, there is a good chance that it is leaking.
When should you replace your commercial hot water tank instead?
There are several reasons why you might want to upgrade your commercial hot water tank instead of just getting it repaired. If your hot water tank is 10 years old or older, it’s time to start planning for replacement. If you are continually losing water through leaks, it’s also time to replace your water heater.
There are a few signs that can help you determine when it’s time to upgrade your commercial hot water tank.
- Your hot water tank consistently leaks
- Leaks on your commercial hot water tank can be a major problem for your business.
- You are consistently losing a significant amount of water
- Some commercial water heaters can lose up to 20% of their water volume. That means if you are losing that much water, it’s time to replace it before it breaks!
- Your commercial hot water tank is older than 10 years
- Replacing your hot water tank is often a better choice than repairing a 10-year-old tank.
How do you know if you have a bad tank or if it’s time to upgrade?
There are a few things you can do to help determine if your tank is bad. If you want to make sure you catch any issues with your tank before they become a problem, do an inspection.
- Use a thermometer to make sure that your water is hot enough
- Commercial hot water tanks are generally set to require 95° or 110° water. If your water isn’t at these temperatures, it’s time to get it fixed.
- Make sure the water pressure is high enough
- Low water pressure can indicate a leaky tank.
- Look for signs of rust in the water lines or tank
- Rust on the inside of your water lines or tank can indicate a problem.
Buying a new hot water tank for your business
There are a few things you need to keep in mind when you purchase a new commercial hot water tank.
- Make sure the tank is rated to hold at least 5 gallons of water
- The hotter the water, the better. You want to make sure the tank is rated to hold more than your typical usage.
- Make sure the tank is built to last
- Commercial hot water tanks are built to last. You want to make sure the tank is made with quality materials that will hold up over time.
Wrapping up: Is replacing your water heater worth it?
Replacing your hot water tank is a big decision and should only be done after careful consideration of your needs and budget. A new commercial hot water tank can be costly. Depending on the size of your project and the brand and model of the water heater you choose, the cost can be as high as $10,000.
Commercial water heaters are built to last. They are built to handle a lot of wear and tear and can last for 10 years or longer. Most water heaters are built for 10 years or longer, so it’s worth the cost to replace them once they start to show signs of wear and tear.
You need to make sure that your new commercial hot water tank can handle the load before you turn the water on.