Installing an in-house tap for washing your laundry is an essential part of your home. Having access to a reliable, clean water supply is important for keeping your family healthy and happy. If you already have a sink or other drain in your bathroom, you can easily install a tap with very little work. Here’s how to do it:
Plan ahead for a successful install
Before you start digging, you’ll want to know what you’ll be installing. When planning your tap installation, you’ll need to take into account where your tap will go, how it will connect to the water supply, and what kind of water supply you have. Depending on your location, you may be able to install a slow-flow or a standard tap. If your tap will be placed in a kitchen or other high-use area, a slow-flow tap may be a good choice. If your tap will be used for washing only, a standard tap is probably the best option. Know exactly where your tap will go and how it will connect. You’ll also need to know what kind of water supply you have. That will help you choose the right kind of tap.
Choose the right tap for your needs
Once you’ve decided on where and how your tap will be installed, you can choose the right kind of tap for your needs. The most basic type of tap is a spigot. It’s cheap, and it’s also the type that’s most likely to be found on a construction site. It may not be the right choice for your home, and it’s not recommended for commercial use either. For the average homeowner, a low-pressure vessel sink tap is the most common type. It’s easy to install, and it has a low-pressure water flow that’s safe for hand washing. If you want to use your tap for other tasks like watering your lawn or washing your car, you’ll need a low-pressure, non-potable (not for drinking) system.
Check your water supply line
Before you start digging and installing your taps, you’ll want to make sure you have the right pipes and connections. You’ll also want to make sure there is enough water pressure to support your new tap. If there are any issues with your water supply or connections, you can’t just ignore them. If you have low water pressure in your home, you can’t expect your new tap to provide enough pressure for a reliable flow. You could end up with water splashing from the tap or even not providing any water at all. Most water supply companies will provide a map of your pipes and where the various connections should be. Make sure you follow that map. If you have any questions about your water supply, you can ask your water company or plumber.
Remove the old tap
If you’ve chosen a vessel sink, you can remove your old sink with a few simple tools. Get a bucket and a sponge to soak up any water in your sink. Start by unclogging any drain traps that are clogged with hair, food particles, or other debris. Then, use a wrench or pliers to remove the cast-aluminium sink drainpipe. This is usually fastened with a hex nut and a crescent wrench. If your old sink uses copper pipes, you can remove it much more quickly. This is because copper doesn’t rust or corrode in any way. You can cut it down to size with a hacksaw, and you can also remove it with a copper pipe cutter.
Install a compression fitting
After you’ve removed your old sink, you can install your new tap. This will be a compression fitting, which will connect to a low-pressure line. High-pressure pipes are usually aluminium, copper, or PEX (plastic). Low-pressure pipes are usually polyvinyl chloride (PVC) or polyethene (PE). They’re not likely to corrode, and they have good flexibility. If you have a non-potable system, you may use these lines.
Connect new compression fittings to an existing system
When your new tap is in place, you can connect it to your home water supply. If you have a low-pressure system, you’ll need to connect it to a garden hose using a threaded adapter and a shut-off valve. This is a safety precaution, and it will prevent your water from leaking onto the ground if the hose bursts. If your home has a standard water pressure, you can use a new compression fitting to connect a low-pressure line from the tap to your water main. You can use a new compression fitting or an adapter to connect a low-pressure line to your water main. If you have a newer home where the tap is connected to the city water main, you may need an adapter to connect to your private water main.
Final tips
When you’re installing a tap, you’ll want to follow all local building codes. Make sure your floor is level, and make sure the tap will be able to support the water pressure from your water main. The best way to do this is to have a plumber check your water supply and your tap before you start. If you need help installing your own taps, you can always hire a professional plumber. Depending on your location, you may be able to find a plumber via online reviews, word of mouth, or by visiting your local phone book.